How to install and adjust heavy duty work tables?

If you have purchased a heavy duty work table and want to install and adjust it, here are some suggestions and steps to help you through the process.

First: Prepare tools and materials

Before you start installing a heavy duty desk, you need the following tools and materials:

- Wrench or wrench set

- Screwdriver.

- Tape gauge.

- Wood glue

- Support or help the person

Step 2: Clean up the work area

Before starting the installation, make sure your work area is clean and tidy. Clear any obstructions and make sure there is enough space to do the work.

Step 3: Assemble the legs

According to the table's instructions, insert the legs and support rods into the pre-drilled holes on the table top. Use a wrench or wrench set to tighten the screws and ensure the legs are firmly attached to the table top.

Step 4: Adjust the height of the legs

Use a tape ruler to measure the height of each table leg to make sure they have the same height. If there is a difference, you can adjust the height of the legs. Some legs come with adjustment screws that you can turn to increase or decrease the height. If adjusting screws are not available, you can add MATS or shims to the bottom of the table legs to adjust the height.

Step 5: Reinforce the legs

Once you've adjusted the height of the table legs, you need to reinforce them to make sure they don't come loose. You can use woodworking glue to attach the legs to the table top, which will increase stability. Alternatively, you can use a screwdriver to tighten the screws further to ensure they are secure.

Step 6: Test the stability of the table

Before using a heavy duty work table, you need to test the stability of the table. Shake the table gently to make sure it doesn't feel visibly wobbly or unstable. If the base is unstable, you may need to recheck the mounting and securing of the table legs.

Step 7: Adjust the desktop Angle

Depending on your needs and personal preferences, you may want to adjust the Angle of the desktop. Some heavy duty work tables have special mechanisms to adjust the tilt of the table top. If you don't have such a mechanism, you can use a book or other object to support the desktop at the Angle you want.

In short, installing and adjusting a heavy duty work table is not complicated, just prepare the appropriate tools and materials, and follow the instructions of the manual. Make sure the desk is stable and at the right height so you can start using it for a variety of tasks.