What are the common faults and solutions of storage equipment?

Storage equipment refers to the equipment used to store and manage goods. Common failures include equipment damage, operation failure, electrical failure, etc. Common faults and solutions are described in detail below.

First, equipment damage failures

1. The device is aged or worn

Common causes: Prolonged use can lead to aging or wear of components.

Solution: Regular equipment maintenance, replace the damaged parts.

2. The device is broken or deformed

Common reasons: The equipment is overloaded for a long time, or is subjected to external shocks during transportation.

Solution: Stop using the equipment in time and repair or replace the damaged parts.

3. The device is detached

Common causes: The device is not firmly fixed or loosened after a long time of use.

Solution: Re-fix the equipment to ensure the stability of the equipment.

4. The electromagnetic coil is damaged

Common causes: The electromagnetic coil is used for a long time or the current is too large, resulting in damage to the coil.

Solution: Replace the damaged solenoid.

5. The connection screws are loose

Common cause: The connection screws are loose when the device is in use.

Solution: Check and tighten the connection screws.

Two, the operation of the fault

1. The device cannot be started

Common causes: power failure, control system failure, motor damage, etc.

Solution: Remove the power failure, repair the control system, replace the motor, etc.

2. The running speed is too slow or too fast

Common causes: speed regulator failure, motor problems, drive system failure, etc.

Solution: Overhaul the speed regulator, replace the motor, repair the drive system, etc.

3. Wrong turning direction

Common causes: control system failure, drive system problems.

Solution: Repair the control system, repair the drive system.

4. Stop during operation

Common causes: control system failure, motor damage, etc.

Solution: overhaul the control system, replace the motor, etc.

5. Excessive noise

Common causes: Loose parts, worn or damaged equipment.

Solution: Tighten equipment parts and replace worn or damaged parts.

Three, electrical faults

1. The power supply is faulty

Common causes: The power line is faulty or the power switch is damaged.

Solution: Remove the power line fault and replace the damaged power switch.

2. The motor cannot run normally

Common causes: motor damage, loose wiring, etc.

Solution: Replace the damaged motor, check and fix the wiring.

3. The control system is faulty

Common causes: control board failure, control circuit failure, etc.

Solution: Repair the fault of the control board and eliminate the fault of the control circuit.

4. Storage equipment does not work properly

Common causes: sensor faults and control switch faults.

Solution: Repair the sensor and replace the control switch.

5. Short circuit or leakage occurs in the electrical system of the equipment

Common causes: poor electrical line contact, equipment insulation damage.

Solution: Repair the electrical circuit and replace the damaged insulation material.

To sum up, the common faults and solutions of storage equipment include equipment damage faults, operation faults and electrical faults. In order to ensure the normal operation of the equipment, we should regularly carry out equipment maintenance, check whether the various components of the equipment are normal, find and solve problems in time, so as to improve the service life and work efficiency of the equipment.